J-43484 Front Output Shaft Seal Installer

SKU# J-43484

California Residents: Warning

Reward Points You will earn 2 dollars off your next purchase for purchasing this product.

Item Condition: new

Ships today! Order now and receive by Friday March 29 when selecting UPS Next Day Air

In Stock!

Only 2 left

$124.13
Not sure if this is what you need? Give us a call and we'll look it up for free if you purchase the tools or parts from us!

J-43484 Front Output Shaft Seal Installer

J-43484 applies the to New Process and Brog Warner GM Transfer case 1999 to 2013.

Use DT-50649 on the newer style seals.

The output shaft on the automatic 4WD has been redesigned. J43484 installs the seal to the output shaft and into the case at the same time. The seal must be installed flush with the case by bottoming the tool on the case. J-43484 has several surfaces to ensure proper contact with the seal to avoid seal damage and to ensure that it is installed squarely. Place the seal onto J-43484. Install the J-43484 over the output shaft and drive the seal until J-43484 bottoms out on the case surface. Used with J-8092.

Manufacturer SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Brand SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Storage Code U-259

Warning: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Terms and Conditions

Used with J-8092.